Available in Delhi NCR only

Care & Cleaning

For best results, keep the following in mind when caring for your KOHLER product:

Always test your cleaning solution on an inconspicuous area before applying to the entire surface.

  • Wipe surfaces clean and rinse completely with water immediately after applying cleaner.

  • Rinse and dry any overspray that lands on nearby surfaces. Do not allow cleaners to soak.

  • Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces.

Bathroom Sinks

KOHLER® Cast Iron

Rinse thoroughly and use a soft cloth to wipe the product dry after each use. In the rare occurrence of stubborn stains, use abrasive cleaners sparingly, but not on Safeguard® slip-resistant surface. Use a soft nylon brush on the Safeguard surface, on the bottom of the bath. Do not use steel wool, wire brushes or abrasive sponge pads.

Vitreous China

Rinse thoroughly and use a soft cloth to wipe the product dry after each use. Soft abrasive cleaners may be used when necessary to clean KOHLER® vitreous china products. Strong abrasive cleaners will scratch and dull the surface.

Click here for warranty information or call Toll Free no. 1 800 103 224.

* Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas.